FCC Part 15 Certification

Contact

Clients may call, write, or email VPI Laboratories to request information regarding the testing, procedures, and fees for FCC certification of their equipment.

Quote

VPI Laboratories will issue a written quote for the FCC testing requested based on the information received from the initial inquiry and from reviewing any necessary technical data. The fees will cover complete testing, preparation of filing materials, and 100% support of the work performed.

Materials

The information and materials listed on page 2 are required by VPI Laboratories in order to complete FCC Part 15 Certification. VPI will review the materials when received. If additional information is required, VPI will contact the client.

Failures

If the equipment fails to meet the test requirements, VPI Laboratories will notify the client to outline the failures. Depending on the service requested by the client, VPI will work to determine and/or correct the possible sources of the failures. If the failures cannot be corrected with the sample VPI has, an outline of where the problems originate and design changes that may correct the failures will be given to the client. If the failures continue, the client may take the following actions:

  1. Schedule time to have an engineer familiar with the design and operation of the equipment come to VPI and assist in finding the proper modifications to the unit.
  2. Send a list of possible modifications for VPI personnel to make on the unit.
  3. Send a unit with modifications already installed.

If the problems cannot be resolved in a reasonable length of time, the client will be invoiced for the work completed to date on a prorated basis. VPI will continue to assist the client in any way. A new quote will be issued for the remaining work once the corrections have been made.

Completion

After the satisfactory completion of the tests, VPI Laboratories will organize the test data and filing materials into a complete FCC report. A copy of the report will be mailed to the client for their records. The FCC report will be submitted to the Telecommunications Certification Body (TCB) for approval through the FCC.

TCB Grant

The FCC has created the Telecommunication Certification Body (TCB) program to allow independent laboratories to provide equipment certification through the FCC. VPI Laboratories will use a TCB which means that we can now grant the equipment certification through the TCB program. Once all the necessary documents are received, the FCC TCB Grant process normally takes about one to three weeks. Or you have the option of using a TCB of your choice.

Congratulations

The equipment can now be sold in the U.S. as a Part 15 Certified device.

Materials Required for FCC Part 15 Certification

  1. Equipment: One (1) set of the equipment to be certified. The interconnecting cables, telephone cords, power supplies and software must be included. If the equipment is a computer peripheral, it must be tested with a host computer. If the peripheral is not IBM desk top compatible, a computer, the necessary software, and additional peripheral to make up a complete "system" need to accompany the peripheral to be certified.
  2. Client's contact name, address, and phone number.
  3. Applicant company name and address.
  4. Manufacturer company name and address.
  5. FCC Identification number.*
  6. Model number(s) and/or trade name(s) of the equipment to be certified. Specify differences between the multiple model numbers.
  7. Schematic diagram(s) of equipment being certified.
  8. Block diagram showing the signal paths and clock frequencies of the equipment being certified.
  9. User's operating/installation manual which contains the required FCC statements.*
  10. Additional instructions if needed for VPI to operate and install the equipment properly for testing.
  11. The actual FCC label to be affixed to the device. This may be submitted as a photograph, engineering drawing, or actual sample.*
  12. A diagram showing the FCC label placement on the equipment.
* Additional information is available from VPI explaining these requirements.

VPI Laboratories Wanship Facility







VPI Laboratories has the facilities and equipment to fill your EMC testing needs.

        Copyright © 2016, All right reserved